Knowing how to maintain your newly replaced back windshield helps ensure your car looks pristine. Here are a few tips that will help you keep your new windshield in good condition as long as possible:
Here are some effective maintenance tips for you.
When you get a new back windshield, it’s stuck in place with a sticky substance called urethane. This substance needs time to dry and become hard. This process is called curing. It might take up to 24 hours for the urethane to fully dry, depending on how humid it is and the temperature. So, as a general rule, you shouldn’t drive your car for at least an hour after getting the new windshield. This helps the sticky stuff dry properly and keeps the glass in place without any gaps.
When you get the back windshield replaced, the repair centers might use tape to hold it in place. You might want to take off the tape to make your car look nice again. But don’t remove the tape right away. The service provider will tell you how long to wait. This is to prevent dust or other stuff from getting stuck in the glue. If debris gets in there, it can weaken the connection between the glass and the car body, ruining the whole replacement. Generally, it is recommended not to remove it for a couple of days.
Car washes use strong jets and pumps to clean cars. If the adhesive or sealant on your new windshield isn’t dry yet, these jets can damage it, leaving you with a poorly fixed windshield.
If the car wash uses cleaning liquids, they might be harsh on the adhesive. So, wait at least 24 hours after rear window replacement before washing your car. If your car is dirty and you can’t wait, wash it at home with gentle soaps and low-pressure water sprays.
Air pressure can push on the seal around the car glass, causing leaks. To stop this, leave a window slightly open for the first day after the glass is put in. This can help prevent any problems.
Don’t put too much pressure on the adhesive while it’s drying around the new glass. Close the car doors gently instead of slamming them, and avoid driving on rough roads with lots of bumps and potholes.
In short, it is advised to avoid car washes and be very gentle with the newly replaced back windshield to ensure its proper placement. You should also keep a window slightly open and not remove the retention tape for a couple of days after the replacement.
Do not drive the car immediately after the replacement to ensure proper curing. These aftercare tips are essential to help maintain your new back windshield replacement and to protect your investment.
To protect your new windshield, avoid sudden temperature changes and use gentle cleaning products. Also, be gentle with the doors and stay away from car washes.
If you leave your windows slightly open, it lowers the air pressure inside your car. This helps the new windshield to seal and stick properly. You only need to leave the windows open a little for a day or two. After 48 hours, you can use your car like you usually do.
Wait for a few days after windshield replacement before using wipers to ensure the adhesive has set properly.
